dsr01dsr02va20vc02vc04rd10b03 facebooktwitter

 

VC04

viaRadio model VC04

Inexpensive High quality, full featured dynamic RDS/RBDS Encoder

Download a spec sheet

c04

co4 rear

Overview

This encoder has the same internals at the top-of-the-line C02 but omits the screen & Jogwheel and TCP/IP functionality is optional.

Dual Sync inputs and RDS outputs allow the C04 to properly interface with both main and backup airchains.

Four Serial ports and an (optional) integrated TCP/IP Interface running UDP and the more reliable TCP makes it easy to integrate the encoder into an existing network allowing you to monitor, program and control the encoder via TCP/IP ( & SNMP) from anywhere.

Each encoder comes with Arcos Config Configuration Software which runs under Windows and allows you to configure all features of one encoder or an entire network without resorting to complicated Telnet commands.

Practical applications of the C04 extend from basic Station features such as Scrolling PS to real-time Title and Artist display to advanced RDS applications such as Traffic Message Channel (TMC), Emergency Warning Systems, RT+ and song tagging

Highlights

• Supports ALL RDS & RDBS functions and applications

• Remote access and control via TCP/IP - 5 ports both TCP and UDP, supports SNMP and SNTP (Internet time updates )

• 4 Serial Ports that can be used simultaneously

• User-friendly configuration GUI for configuration and control

• Dual inputs and outputs for Main + Backup Transmitters

• Latest DSP processor technology - no maintenance required

• Extensive Automation system support

• Automatic RT+ generation from Titile and Artist

• Hourly and daily group counts by group number

• Optional RDS Lab decoder can decode all RDS including RT+ and TMC

• Comes with viaRadio's unmatched after-sales-service and expertise in all things RDS

 

Hardware

The C04 operates over a wide range of input impedances and output levels so it can match up with almost any transmitter system. It can be set up in pass-through mode if your exciter does not have a spare SCA port and will use an internal 19KHz clock if there is no external pilot available.



The box is a standard 19" by 1 R/U. At its heart is a powerful microcomputer for controlling the hardware functions, managing the RDS data and driving the interfaces. Four RS-232-C interfaces are available. The screen can display all programmable settings and the jog wheel can be used to change them so you can set up the encoder without taking a computer on site.

The RDS signal is generated using a powerful DSP and the Inputs and Outputs can be configured as unbalanced or balanced while a third front panel output allows for convenient monitoring. If the C02 needs to be connected to a stereo generator or exciter without an SCA port then it can be configured in pass-through mode allowing you to simply place the C02 in series in your program chain.

Functions such as nonvolatile data storage, watchdog, real-time clock, remote-control inputs and signaling relays are standard in the C04.

 

Easy-to-Use Software

With some encoders, configuration can be difficult requiring you to learn and navigate through many DOS commands to set up your Encoder.
Our Windows software make this much easier, allowing you to do everything from the GUI.
Configs can be saved as XML files and you can manage an entire network of Encoders from one interface.

ArcosConfig Software Screenshots

  

 

Automation System Interface

Automation systems can be interfaced via Serial port or sending UDP or TCP to the IP port. Both complete string and Title & Artist automation are supported using commands customizable for almost any system.

The latest firmware ( free upgrade) supports automation creation of RT+ from Title & Artist for mobile devices like the Mocrosoft Zune or Apple Ipod

 

Complete String   

DYNPS= Now Playing Satisfaction by  the Rolling Stones on Magic 95"

 Or, Title  + Artist

Title= Satisfaction,  Artist= The Rolling Stones

Output = Now Playing <Title> by <Artist> on Magic 95

 

Powerful RDS Lab Decoder option

The optional RDS Lab software allows you to see and log just what is being output including Scrolling PS, RT+, TMC and other data services.

RDS Lab Screenshots

                     

 

return to products